Sold Out

6J(H)-R2006GS-F24W2DX

165.00€

  • Model: FUT1077N
  • Manufactured by: FUTABA


 Futaba 6J 6-Channel 2.4GHz
                S-FHSS and FHSS Selectable Mode Radio System.
                    This version does not include servos.


FEATURES: Selectable S-FHSS and FHSS modes, the included R2006GS receiver
            automatically adapts to the selected mode
          Capable of 4 channels only in FHSS mode
          Fail safe on all channels in S-FHSS mode only (throttle channel only
            when FHSS mode is selected)
          15 model memory with 4 character model naming
          40x40 127 segment LCD display
          Modes 1-4 selectable by pilot
          R2006GS high-voltage (4.8 - 7.4V) 6-channel receiver with Easy-Link
            circuitry, frequency hopping, spread spectrum design and Dual
            Antenna Diversity
          Endpoint adjustment (EPA), sub trims, servo reversing & throttle cut
          Throttle position, mix and low battery warnings
          Trainer system (trainer cord not included)
                

Airplane Features;
            Two programmable mixes and two 5-point throttle curves
            Two 5-point pitch curves
            Flaperon with differential rate
            Flap trim (2 rates)
            V-tail mixing
            Elevon mixing
Helicopter Features;
            Two 5-point throttle curves
            Three 5-point pitch curves
            Throttle hold
            Hover pitch
            Gyro and revo mixing
            Four swash plate types (H1, H3, HR3 & H3 w/AFR)
            Swash AFR (ail/ele/pitch)
            Throttle mix
            Electronic swash ring
            Throttle and pitch delay


INCLUDES: Futaba 6J 6-Channel Transmitter, R2006GS Receiver, Instruction
            Manual, Neckstrap and Smooth Ratchet Plate for Heli Throttle
           There is an optional NiMH battery which can be used,
          FUT312 . To use this, you will need to purchase a battery charger .


REQUIRES: AA Cells: Four for transmitter
          Servos 
          Receiver battery


SPECS:      Transmitter;
          Type: 2-stick, 6-channel, FHSS/S-FHSS selectable
          Frame Rate: 6.8ms
          Current Drain: 170mA
            Receiver;
          Modes: FHSS or S-FHSS (auto selectable)
          Power Requirements: 4.8V-7.4V
          Compatible Batteries: NiCd, NiMH, LiPo, LiIon & LiFe
          Dimensions: 1-11/16 x 15/16 x 5/16" (43 x 24 x 7.9mm)
          Weight: 0.29oz (8.3g)
          Current Drain: 80mA (at no signal)


COMMENTS: To use the NiMH battery FUT312 , you will need to purchase
          charger FUT313.  


Customers who bought this product also purchased...

Your IP Address is: 54.162.114.84
Designed & Hosted by Dynamic Promotion
Web Hosting - Eshop Solutions